Merit LILIN H.264 HD 2MP 15FPS IP Camera Release Note ================================================================================ Device Support List 1. LB1022 2. LD2122 3. LD2222 4. LD2322X 5. LD6122X 6. LR6122X 7. LR7022 8. LR7424X/LR7428X 9. LR7022 10. LR2122 Update firmware from web interface 1.Login into the IP Camera via IE. 2.Click on Configure->System->Firmware Update 3.Click on "Browse" button to locate the firmware file, flasham32.bin. 4.Click on "OK" button. 5.Wait the web interface to be reloaded again. WARNING! YOU DO NOT HAVE TO UPGRADE THE LATEST FIRMWARE. HOWEVER, THE LATEST FIRMWARE CAN IMPROVE THE DEVICE's SYSTEM PERFORMANCE. THERE ARE ALSO RISKS FOR UPGRADING THE NEW FIRMWARE INCLUDING POWER FAILURE, LOW BANDWIDTH, or FLSAH DISK BROKEN. THE RESULT MAY REQUIRE RETURNING the DVR BACK TO YOUR ORIGINAL PROVIDER FOR REPAIRING. Upgrade from OS 1.1, 0S 1.2, and OS 1.3 to OS 1.4 take 10 minutes. Please do not power off the camera. If the update page is time out, please use IP Scan to detect if the camera bootup successfully. ================================================================================ Version 1.4.36 (2014/12/19) 1.Supported new UI for L series. 2.Updated ActiveX to 1.0.50.119. 3.Removed master password for security issue. 4.Fixed NTP time sync for half hour time zone. For example, 12:30, fixed the half hour time zone issue. 5.Fixed shutter rolling issue if the frequency is at 50Hz. 6.Fixed OEM version not support DDNSIPCAM. 7.Modified the value of the video quality in day mode to 48 for OV sensor. 8.Supported customized URL and allow English and numeric values. 9.Supported RTSP for authenticaion for security issue. 10.Fixed night time quality default setting, contrast: 45, expolsure:3, and saturation: 50. 11.Supported JPEG VGA resolution for smooth video. Please set ONVIF setting to Control4. 12.Changed motion detection default sensitivity to 30. 13.Fixed the problem for not saving saturation setting. 14.Supported manual settings for IR cut on and off feature. 15.Fixed the ONVIF setting for the bitrate range, the HD stream for H.264 is 8M and the SD stream is 3M. 16 Fixed crash issue if LILIN iOS Viewer sends wrong SD card polling commands. 17.Modified if the IP or port is changed, it switches to the new IP or new port webpage automatically. 18.Supported half hour NTP time zone. 19.Fixed setstreaming cgi for not changing profile setting. 20.Fixed brightness default value to 50. 21.Fixed s sensitivity issue for if there is only one grid for motion detection grids. 22.Added Focus Assistant for VariFocal models. 23.Supported Fermax option to become JPEG480P to JPEG VGA for Fermax. 24.Supported Stanley version to use DDNSIPCAM. 25.Changed audio detection sensitivity to 52. Version 1.1.20 (2014/3/7) 1.Fixed when the alarm trigger feature is disabled or enabled and caused the alarm feature doesn't work. 2.Fixed when entering the time manually which is limited between the year 2012 and 2036. 3.Fixed when the audio is detected only once, but it keeps sending the alarm in CMX and doesn't stop. Version 1.1.16 (2013/1/22) 1.Supported the IE11 browser. 2.Fixed if the HTTP Port is not 80, the SD card webpage doesn't show the video when playback. 3.Modified the buttons of SD card playback webpage and the size of the screen when playback. 4.Added the feature if the watchdog reboots three time in a row, the video setting goes back to default. 5.If the SD card is in always record mode, the time interval between the recorded files get reduced. 6.Fixed when using the quicktime to play the UDP stream, there is no audio output. 7.Fixed the frame rate limited in ONVIF. 8.Added the Turkish language. 9.Fixed when connected with the NVR if the frame rate low which can get video loss easily. 10.Modified the default setting of video quality to +5 for night mode. 11.Fixed when make the camera setting in CMX, there is no face detection for L series IPCam but the log shows the face detection setting. 12.Modified the operator rights. If an operator is created by administrator, the "Administrator" box is not checked and the "Panel Control" is checked so that the administrator can add this operator as admin right at any time. 13.Fixed when using the IPScan to change the IP address if the IPCam is connected by NVR or CMX, the H264 and JPEG get stuck by 1 online user. 14.Fixed the avi files of the SD card recording that the pre-recording and the current triggered recorded video files are both included the wrong video data. 15.Fixed if continuously click the video files to playback the files in SD card, it can cause the files not to be playback properly. 16.Added the HTTPPOST webpage. 17.When enable the "Bypass Logon" feature, the RTSP authentication will be disabled. 18.Fixed when the audio "Sampling Rate" is switched, it starts to reboot and there is a "clicking" sound can be heard in the end of 10 seconds. 19.Fixed when enable the "Bypass Logon", the webpage shows an message of updating error. 20.The baseline mode is removed and the only setting is main profile now. 21.Updated the ActiveX to 1.0.50.112 version which supports to show up the ActiveX recording time. 22.Fixed the SD card backup when the file is finished playing, it will not repeat playing. 23.Removed the Quality Schedule webpage of the LD2122 and LD2222. Version 1.1.12 (2013/9/30) 1.Fixed the synchronizztion issue as sometimes the time doesn't sync correctly. 2.Fixed to mount the SD card and gets failure. 3.Added the DDNS feature if selected the ddnsipcam.com and it will update to the server every hour. 4.Fixed the day light saving issue that it doesn't go back to the proper time zone sometimes. 5.Fixed when set up the day light saving for the first time from the main web page and switch to the set up page that the setting can't be set up properly. 6.Added AVER for the ONVIF. 7.Fxied the VLC connection issue. 8.Supported Simplify Chinese language. 9.Fixed if the device name is not entered to the IPScan, the camera can't be detected properly in IPScan. 10.Fixed the issue on profile 3 that the 1080P JPEG live image can't be retrieved. 11.Fixed if the SD Card recording is enabled that the Mount, unmount and format buttons are disabled. 12.Removed the "Delete Log" button. 13.Added the httpd item if the network issue to cause the user unable to connect to the camera that the camera will reboot automatically. 14.Fixed the "Shutter Limit Max" doesn't take place on the web when switch between day and night mode. 15.Removed the guest account. 16.Added SD card OSD feature to show the SD card status (Black--> No SD Card, Blue--> SD card inserted and Red--> SD card recording) 17.Added the feature for the user to specify the FTP port. 18.Fixed the issue on profile 3 if the JPEG is over 100K sent via E-mail which may cause the camera reboots. 19.Fixed the device name and ActiveX OSD in the general set up page that both can't be empty. 20.The default setting for MIC Volume is set to 50 and Audio Input Filter is set to 1. 21.Fixed the UI ActiveX version to 1.0.50.97. Version 1.1.010 (2013/5/29) 1.Modified the reset time from 10 sec to 5 sec on the physical reset button on the camera. 2.Fixed the live image to get all white or black image issue when power on the camera. 3.Fix the IRCut abnormal issue when select it to the day time or night time. 4.Fixed the JPEG image to be 0Kb file when sent via FTP. 5.Fixed the settings not to be saved when modified using the IPScan Tool. 6.Fixed when the HTTP and RTSP ports can't be set to the same value. 7.Added DC Iris Mode to Vari-Focal webpage. 8.Supported "-" symbol in DDNS. 9.Fixed the FTP issue when the PPPoE is not able to dial up, sending image fails in active mode. 10.Fixed the mask issue when the TV out is switched on or off, the mask might disappear. 11.Fixed the SD card mounted issue. 12.Fixed the audio adjustment issue. When the audio is switched on or off, the camera might reboot. 13.Fixed when sending the live image via FTP, the ID & password are entered correctly, then the images start sending. In the meanwhile, if the ID and password are changed, the images are still sending. 14.Fixed the issue when click on the reboot system which shows the error message "Status:12152". 15.Fixed when the SD card is not inserted, the SD card button disables and can't be enabled again. 16.Added the feature when the files are deleted or formatted in the SD card, this will be written to the log file. 17.Fixed when format the SD card and it starts to count down and an error message shows up. 18.Fixed the smtp that the sender and receiver fields position get upside down. 19.Fixed when added the users in IE9 & IE10 that it might cause the user ID error message. 20.Fixed when the SD card is unmounted but it still shows the SD card inserted. 21.Fixed the PPPoE dial up issue, when switch to another webpage and it takes longer to switch to another webpage if the PPPoE is enabled. Version 1.1.006.2 (2013/4/30) Fixed bug: 1.The AP version is 1.1.006. 2.When burning the firmware, it now erases the flash before burning and the flash file system UBIFS error is fixed. 3.Fixed the video white spot issue. Version 1.1.006 (2013/2/4) 1. Fixed the DDNS set up page. When set up the dyndns, the host name can't be entered and caused the dyndns feature doesn't work. Version 1.1.004 (2013/1/24) First release All the 2MP 15FPS IP Cameras use this firmware