Version 3.20 Release Note 2001.03.06 Added: 1. Outgoing Call Bumping Support 2. Display peer phone number message in Kiosk 3. Add "Call Bumping" item in setting program -- Kiosk. Fixed: 1. Incoming Call Bumping can not work for Mac. Version 2.27 Release Note 1999.12.24 (a) Bugs fixed 1. Fix "ARA Server side can not work via DrayPPP, DrayMLPPP and DynamicMLPPP" 2. Fix "DrayPPP, DrayMLPPP and DynamicMLPPP compatibility problem with some ISPs". Version 2.26 Release Note 1999.12.16 (a) New functions 1. New Kiosk provides B1,B2 connect time (b) Bugs fixed 1. Fix Sleeping problem of Mac OS 9 2. Fix "can not redial" problem 3. Fix "some files could not be download via PPP, MLPPP, DynamicMLPPP" 4. Fix "line is droped but ARA still shows connection" 5. Fix Kaanu compatible problem under Mac OS 9 Version 2.25 Release Note 1999.11.23 (a) New functions 1. Support Mac OS 9.0, iMac DV, iBook... 2. New Kiosk provides CPS display and dynamic PPP setting Please set the initial value for upgrade to this version : a. minimum connection time ( for second B channel active, it should keep active at lease n seconds ) : 120 secs b. Delay before link reconnect ( for drop second B channel, it should keep deactive at lease n seconds ) : 120 secs c. Upper Threshold ( exceed this threshold, it will try to make second call to be 128K ) : 7200 CPS ( character per second ) d. Lower Threshold ( fall down this threshold, it will drop second B channel to be 64K ) : 5000 CPS (b) Bugs fixed 1. Improve the performance of PPP Version 2.2 Release Note 1999.9.20 (a) New functions 1. Support Isochronous mode transfer. For Isochronous mode to operate correctly, you must have OS 8.6 or later version installed (the USB version is 1.2 or later) and with a device firmware version later than version 1.2. 2. Support PPP/MLPPP dial in function(64K and 128K). (b) Bugs fixed 1. Fix compatibility problem with Leonardo file transfer when using Kaanu. 2. Fix the problem that when device is disconnected with FaxStf is active, the system hangs if FaxStf is turn off. 3. Fix MLPPP compatibility problem with some ISPs. Version 2.1 Release Note 1999.8.9 (a) New functions 1. 4800 Fax 2. 2400 modem "isdnVigor128 2400 modem" is for this service. 3. Dynamic MLPPP (BOD) "isdnVigor128 DynamicMLPPP" is for this service. It will automatically add/drop the 2nd B channel if data transmission/receiving throughput exceeds threashold. 4. Call bumping function User does not need to set anything for enable this function, it will automatically run. When 128K connection is working(MLPPP), it will automatically drop one B channel for accepting an incoming analog call. And if you want to make an analog call out, it will automatically drop one B channel for this outgoing analog call. 5. Support Apple Talk for "isdnVigor128 DrayPPP", "isdnVgior128 DrayMLPPP", "isdnVigor128 DynamicMLPPP". At client side, you can use one of these protocols to make128K connection for Apple Talk. For server side, you can only use "isdnVigor128 PPP" for 64K connection now. Version 2.03 Release Note 1999.7.15 (a) Bugs Fixed 1. improve V.23 protocol 2. Solve occasional hang prmode 2. add "isdnVigor128 HDLC" modem script file 3. multi-language supported for "isdnVigor128 Kiosk" Version 2.02a Release Note 1999.6.10 (a) New functions 1. Build with Apple USB DDK V1.2 2. Add "Own User Phone Number" setting at "isdnVigor128 Kiosk" 3. Add "Call Bumping function". When you are using MLPPP and there is an incoming call or you need to send an analog call(for example: FAX), Vigor128 can automatically drop one B channel and automatically recover it after the analog call is finished. Version 2.02 Release Note 1999.6.01 (a) Bugs Fixed: 1. incoming fax can not be accepted Version 2.01 Release Note 1999.5.25 (a) Bugs Fixed: 1. Fix compatibility problem for Mac OS8.6 2. Solve Fax Tx/Rx occasional unstable problem 3. Imporve DrayPPP, DrayMLPPP, PPP transmission rate 4. Solve occasional hang problem while accessing the Internet. 5. Solve occasional line drop problem while accessing the Internet. 6. Solve "AT command has no response" under some special condition (b) New Features: 1. Add "isdnVigor128 V.23 modem" You can use this modem type to connect to V.23 server. 2. Provide "Multi-Port" for isdnVigor128 After installing V2.01, you will have 4 Vigor ports which allow you to open 4 applications simultaneously. Multi-port function: For version below 2.01, users can only have an application using Vigor128 at one time. When you are surfing the Internet, you can not receive or send fax even when you are using only one B channel. Actually, this is a limitation of the Mac's psuedo com port. We make some magic in our driver to jump over this limitation, which makes it possible to support two applications using Vigor128 via ISDN simultaneously. This is extremely desirable for ISDN communication. Moreover, even though there are only two B channels, we support 4 Pseudo Ports to let users assign them to 4 different applications with different configurations(MSN, flow control..) to free user from changing configuration from time to time when switching between different applications. Version 1.06 Release Note 1999.4.26 (a) Bugs Fixed: 1. support Faxcilitate, ValueFax, MacVtx 2. fix V.120 compatible problem 3. improve DrayMLPPP transmission rate 4. improve X.75, T.70 transmission Version 1.05A Release Note 1999.4.06 (a) Bugs Fixed: 1. fix the compatible problem of "isdnVigor128 DrayPPP" (b) New Features: 1. Add "isdnVigor128 DrayPPP" & "isdnVigor128 DrayMLPPP" modem type "isdnVigor128 PPP" is the PPP provided by O/T or FreePPP or others you select in TCPIP. "isdnVigor128 DrayPPP" which support dynamically add/drop 2nd B channel is the PPP provided by DrayTek. The AT command for "isdnVigor128 PPP" is "+ibp=10", for "isdnVigor128 DrayPPP" is "+ibp=6" and "isdnVigor128 DrayMLPPP" is "+ibp=8". "isdnVigor128 PPP" does not support "dynamic Add/Drop 2nd B channel" function. You can use "isdnVigor128 PPP" or "isdnVigor128 DrayPPP" as modem type for 64K internet connection. Version 1.05 Release Note 1999.3.25 (a) Bugs Fixed: 1. improve the ping rate 2. Solve the problem of PPP connection when using "guest" to login (b) New Features: 1. dynamic Add/Drop 2nd B channel Now you can add/drop the 2nd B channel whenever you want. Click "Control Panels"->"isdnVigor128 Kiosk" If you select "isdnVigor128 DrayPPP" as modem type, you will get 64kbps connection first. You can add 2 B channel when you need to use MP to increase the download rate. If you select "isdnVigor128 DrayMLPPP" as modem type, you will get 128kbps connection first. You can drop a channel when you don't need 2 B channels. You can also add/drop the 2nd B channel whenever you want. 3. A-law/u-law setting You can set A-law or u-law analog coding method through Kiosk setting program to meet local Telecom coding requirement. The default value is A-law for Europe. If you can not send/receive FAX correctly, you may need to change analog coding method. Version 1.04 Release Note 1999.1.14 (a) Bugs Fixed: 1. Solve the incorrect Username/Password will get an error indication of "Invalid IP" instead of "Authentication Failure" when using MLPPP. 2. Solve chap will cause line drop problem when using PPP. 3. Solve installation error for Italian version. 4. Solve occasional line drop problem while using X.75 protocol. 5. Solve some iMacs can't start with isdnVigor128 pluged. (b) New Features: 1. MSN/Phone number setting program : You can use the "isdnVigor128 Kiosk" to set the incoming MSN, phone number, phone subaddress and get the driver version information. You can also monitor the ISDN line's behavior. Click "Control Panels"->"isdnVigor128 Kiosk" (1) MSN setting The Multiple Subscriber Number (or MSN) is an ISDN feature that allows you to have more than one directory numbers for a single BRI. Thus if you have more than one ISDN devices connected to the NT1, you can set a specific MSN to the isdnVigor128 so that it can accept an incoming call that is called to the MSN. For example, if you set an MSN as "123", the isdnVigor128 will only accept the call with "Called Party Number" as xx..x123. Where xx..x denotes any leading digits of the MSN "123". (Only the last digits of the numbers are compared!) You can set up to 10 MSNs to the isdnVigor128. By default, no MSN is assigned. In other word, the isdnVigor128 will accept all incoming calls. (2) Phone Number/Phone Subaddress Setting If you set the phone number/phone subaddress fields, they will be sent to network when you place a call. By default there's no such setting. (3) Version It will display the current dirver's version information. (4) Lamps of ISDN/B1/B2 ISDN : Lights up when the ISDN line is activated. B1/B2 : Lights up when the B1/B2 channel is employed. Press Apply to save the current Kiosk settings to the memory in order to become effective. At any time, you could press Reload to load settings in the memory to the Kiosk display. You can use command+Q or File->Quit to quit this setting program. Version 1.03 Release Note 1998.12.9 (a) Bugs Fixed: 1. Solve Mac OS 8.5 compatibility problem. 2. Solve occasional hang problem while accessing the Internet. 3. Solve MSN setting problem. (b) New Features: 1. Fax Capability: This version provides fax class1 interface for sending/receiving fax using fax applications such as FaxStf which is bundled with iMac OS 8.1. Follow the steps below to setup FaxStf for using Vigor 128 to send/receive fax: (1) Double click "Fax Browser" icon. (2) Click "Edit"->"Settings..."->"Fax Modem"->"Modem..."-> "Driver Type"->"Class 1 for 9600 send/receive Modems"->"Select". (3) Click "Modem Init", type in initial string "AT&FVEX2". (4) Click "Ports"->"Vigor128 USB TA". (5) Click "Fax Software"->"Activate"->"Done". NOTE: Due to the uncertainty of loading order of the FaxStf and the Vigor driver, FaxStf has to be activated (step 5) manually after OS is booted. 2. Multi-Link PPP Two B channels can be bundled together for increasing throughput, choose "isdnVigor128 MLPPP" as the modem script in the "Modem" setup window. NOTE: The status bar of the Remote Access always reports a 64K connection. The number of B channels used is indicated by the ISDN LED. Double blinking means two B channels are used and single blinking denotes that one B channel is in use. Known Bug: If you enter the incorrect Username/Password and use Multi-link PPP to access your ISP, you will get an error indication of "Invalid IP" although the correct status report should be "Authentication Failure". This bug will be fixed in the next driver release. 3. V.110 Choose "isdnVigor128 V.110" as the modem script in the "Modem" setup window. TIPS OF INSTALLING NEW DRIVER: You may unplug USB cable of Vigor128 before installing new driver ! New driver will work after you plug Vigor128 to Mac. Otherwise, the new driver will work after restarting Mac. http://www.draytek.com.tw DrayTek Corp. Uninstall Message: After installing driver, you will have the files at the following folders(there may be different for different version): (1). vigor128.sys : in "System Folder->Extensions" ( This is the driver for Vigor128 Mac model.) (2). vigor128dual.sys : in "System Folder->Extensions" ( This is the driver for Vigor128 Mac/PC dual mode model.) (3). isdn Vigor 128 Kiosk(or isdn Kiosk for version later than 2.2) : in "Syetem Folder->Control Panels" ( This program is a setting program for phone number, analog coding method, 2 B channel control ...) (4). VigorATUserX : in "System Folder->Preferences" ( This is the user's setting file for AT command and Kiosk setting.) (5). isdnVigor128 modems : in "System Folder->Extensions->Modem Scripts" ( These are modem script files for isdnVigor128.) You can install this new driver to overlap old driver without any problem. If you want to uninstall isdnVigor128 Mac driver, you can just delete these files. If you have installed isdnVigor128 Mac V1.03 or V1.04 or V1.05, please deleate "isdnVigor128 MLPPP" at "System Folder->Extensions->Modem Scripts" first. If your modem has no response and you have installed V2.0 , please delete all the files at (4). Then install the newest driver.