TIPS OF INSTALLING NEW DRIVER:

1. You may plug USB cable of Vigor128 before uninstalling old driver.
2. Execute the uninstall file with the new driver.
3. After uninstalling old driver,you could unplug and then plug the cable 
   ,and the system can find the new deviece to enter install procedure.
4. New driver will work after restarting windows.


http://www.draytek.com.tw
ftp://ftp.draytek.com
e-mail:support@draytek.com.tw

DrayTek Corp.


Version 2.30 Release Note    2000.10.03

(a) Bugs fixed

1. Fixed the connection problem with ZyxzL Prestige 202.
2. Fixed the dial out problem for Vigor128U with some switches.
3. Fixed the crash problem while using the virtual-com port function on
    win98.
     
(b) New feature

1. Added ISDN loopback test function.


Version 3.0 Release Note     2000.12.07

(a) Bugs fixed

1. Fix "MLPPP" only connect 1B at first time.

(b) New feature


Version 3.1 Release Note     2001.01.09

(a) Bugs fixed

Command:
1. Fix windows can not dial out for some special environment
   (dependent to computer hardware system and applications)
   after connecting to ISP.
Win2000:
Fix
1. When server disconnect the call,it would cause dial-up 
   network icon hang.
2. Unplug ISDNLine after time out would cause dial-up network 
   icon hang.
Win98:
1. Fix driver may not be active after windows starts for some 
   special environment(dependent to computer hardware system 
   and applications).

(b) New feature


Version 3.2 Release Note     2001.03.06

(a) Bugs fixed

Command:
1. [modified] Connection speed was showing 115200.
	      Change to 64000 or 128000(virtual modem)
2. [fixed] Using "auto search driver" function to instal driver will
	   get wrong Windows Version driver.
3. [fixed] If you use MLPPP and software compression,Vigor128 
	   connects only with one channel.
4. [fixed] Both MLPPP and DynamicMLPPP flow disappear for 1-2sec and 
           then flow starts again.
5. [fixed] SET and HELP button in KIOSK are not working when 
    	   Vigor128 is unplugged.
6. [fixed] If you unplug USB cable from Vigor128 while connected
	   to Internet,computer totally block.
7. [fixed] The flow is significantly effected by opening and closing
	   additional channel while PPP connection is established.
	   In some occasions,the flow almost disappears.
8. [fixed] Using NDISWAN to dial to server,if busy,it will display
	   "Modem Error" instead of "Peer Side Busy"
9. [fixed] For some special Windows environment,Vigor128 can active 
	   after Windows power on but can not make call out. The only
	   way to make it work is unplugging Vigor128 and replugging
  	   to USB port.
10.[fixed] For some special Windows environment,Vigor128 will not 
	   active after Windows power on.The only way to make it work is 
	   unplugging Vigor128 and replugging it to USB port.
11.[fixed] Kiosk-when opened via the Start Windows menu,the Kiosk is in 
	   German in professional mode.
12.[fixed] Kiosk-B2 always does not display connection message.
Windows 2000:
1. [fixed] If you unplug ISDN line from Vigor128,after time out,
	   connection will be discnnected but dialup network hang.
2. [fixed] If server side disconnects the call,connection will be 
	   disconnected but dialup network icon hang.

(b) New feature
1. Virtual modem support or Win2000.
2. Fully uninstallation program.