*********************************************************************************************** Release Notes for Vigor2200 Series Firmware Version : v1.08 Build Date/Time : Fri Oct 19 15:41:38.66 2001 DrayTek Corp. Date: 2001/10/25 *********************************************************************************************** Files Description: <<< Firmware >>> \Firmware\v2k20108.all --- Lastest released firmware \Firmware\v2k20108.rst --- lastest released firmware with default settings \Firmware\AutoUp\Windows\v2k20108.exe --- Auto-Upgrade Utility, this utility will work after v1.07 released firmware. \Firmware\AutoUp\MacOS9\AutoUpgrade_v1.08.hqx --- Auto-Upgrade Utility for Mac OS9 << Tools >>> \Tools\Windows\RtTools_2.01.exe --- This Router Tools should work with v1.07c firmware or laster. \Tools\Windows\VirtualTA\VSetup2k.exe --- Virtual TA Client 1.06 for Win2000 \Tools\Windows\VirtualTA\VSetup95.exe --- Virtual TA Client 1.06 for Win95 \Tools\Windows\VirtualTA\VSetup98.exe --- Virtual TA Client 1.06 for Win98 \Tools\MacOS9\Router_Tools.hqx --- Router Tools for Mac OS9 Hint for upgrading Firmware: Using Auto-Upgrade Utility: The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily. Before downloading the utility, you have to make sure the current running firmware should be newer than v1.07 (including v1.07). 1. Download the utility v2k2_108.exe to your Windows PC. 2. Make sure the connectivity between your PC and the router. 3. Double-click the utility, it will find your router and then you should push "Send" button to upgrade it. Using Firmware Upgrade Utility: Firmware Upgrade Utility is a TFTP client software. Before upgrading your router, its TFTP srever should be enabled in advance and then the utility could send new firmware file to the router. 1. Using Web Configurator to enable TFTP server. Please click "System Management" > "Firmware Upgrade" to press OK button. Note that now the router is running in boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs are blinking togather. 2. Launch the Firmware Upgrade Utility, and select the firmware v2k20108.all to send. After sending, please wait for 30 seconds to finish the upgrade procedure. Support Models: Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W Release Notes: 1. [Web Configurator] a. Added "Clear" and "Clear All" buttons for DDNS, Open Ports and Call Schedule Profiles. b. Improved HTTP daemon against attacks by nimda virus. c. Removed "None" option of "Link Type" for "Dialing to a Single ISP" and "Call Control and PPP/MP Setup". d. Improved all password fields could be use '*' and '+' characters. 2. [PPPoE] Added the DSS over PPPoE function for PPPoE-enabled ADSL access. Note: DSS stands for Dynamic Service Selection. If the PPPoE-enabled ADSL access netowrk supports multiple PPPoE servers for differnet service grade, the function can automatically connect your router to correct PPPoE server. 3. [NAT] Fixed a Port Redirection problem. 4. [ISDN dial-backup] Improved the stability of ISDN dial-backup function. 5. [DDNS] Improved DDNS function. If you have any DDNS update problems, you can use telnet command "ddns log" to get logs and send back to support center. 6. [Cable Access] Add a "PING to keep alive" function for Cable access users. *********************************************************************************************** *********************************************************************************************** Release Notes for Vigor2200 Series Firmware Version : v1.07d Build Date/Time : Wed Sep 19 19:49:40.73 2001 DrayTek Corp. Date: 2001/09/19 *********************************************************************************************** Files Description: <<< Firmware >>> \Firmware\v2k20107.all --- Lastest released firmware \Firmware\v2k20107.rst --- lastest released firmware with default settings \Firmware\v2k2_107d.exe --- Auto-Upgrade Utility, this utility will work after v1.07 released firmware. This is a patch of v1.07c version. All tools could use v1.07c release level. Hint for upgrading Firmware: Using Auto-Upgrade Utility: The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily. Before downloading the utility, you have to make sure the current running firmware should be newer than v1.07 (including v1.07). 1. Download the utility v2k2_107d.exe to your Windows PC. 2. Make sure the connectivity between your PC and the router. 3. Double-click the utility, it will find your router and then you should push "Send" button to upgrade it. Using Firmware Upgrade Utility: Firmware Upgrade Utility is a TFTP client software. Before upgrading your router, its TFTP srever should be enabled in advance and then the utility could send new firmware file to the router. 1. Using Web Configurator to enable TFTP server. Please click "System Management" > "Firmware Upgrade" to press OK button. Note that now the router is running in boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs are blinking togather. 2. Launch the Firmware Upgrade Utility, and select the firmware v2k20107.all to send. After sending, please wait for 30 seconds to finish the upgrade procedure. Support Models: Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W Release Notes: 1. [Web Configurator] a. Remove "None" option of "Link Type" for "Dialing to a Single ISP" and "Call Control and PPP/MP Setup". b. Add more heximal records for "Diagnostic Tools" > "Triggered Dial-Out Packet Header". c. Fix a bug that all password fields can not use '*' character. 2. [PPPoE for WAN port] Add a feature such that users can use "ISP Name" to specify the PPPoE-based ADSL provider. For example, when you have two or more PPPoE server on the same ADSL line, such as adsl-isp1, adsl-isp2 and adsl-ips3. If the adsl-isp1 offers PPPoE access service for you. You have to type "adsl-isp1" in the "ISP Name" field to specify the PPPoE server. You could click "Internet Access Setup" > "PPPoE" to find the "ISP Name" field. 3. [PPTP for WAN port] Fixed a NAT portmap problem using PPTP tunnel mode with ADSL modem. 4. [DNS Proxy and Wireless LAN] Fixed a DNS bug for wireless LAN hosts. *********************************************************************************************** *********************************************************************************************** Release Notes for Vigor2200 Series Firmware Version : v1.07c Build Date/Time : Thu Sep 6 16:10:44.53 2001 DrayTek Corp. Date: 2001/09/06 *********************************************************************************************** Files Description: <<< Firmware >>> \Firmware\v2k20107.all --- Lastest released firmware \Firmware\v2k20107.rst --- lastest released firmware with default settings \Firmware\v2k2_107c.exe --- Auto-Upgrade Utility, this utility will work after v1.07 released firmware. <<< Tools >>> \Tools\RtTools_2.01.exe --- This Router Tools should work with v1.07 firmware. \Tools\VSetup2k.exe --- Virtual TA Client 1.06 for Win2000 \Tools\VSetup95.exe --- Virtual TA Client 1.06 for Win95 \Tools\VSetup98.exe --- Virtual TA Client 1.06 for Win98 Hint for upgrading Firmware: Using Auto-Upgrade Utility: The Auto-Upgrade Utility can help you to upgrade the router's firmware more easily. Before downloading the utility, you have to make sure the current running firmware should be newer than v1.07 (including v1.07). 1. Download the utility v2k2_107c.exe to your Windows PC. 2. Make sure the connectivity between your PC and the router. 3. Double-click the utility, it will find your router and then you should push "Send" button to upgrade it. Using Firmware Upgrade Utility: Firmware Upgrade Utility is a TFTP client software. Before upgrading your router, its TFTP srever should be enabled in advance and then the utility could send new firmware file to the router. 1. Using Web Configurator to enable TFTP server. Please click "System Management" > "Firmware Upgrade" to press OK button. Note that now the router is running in boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs are blinking togather. 2. Launch the Firmware Upgrade Utility, and select the firmware v2k20107.all to send. After sending, please wait for 30 seconds to finish the upgrade procedure. Support Models: Vigor2200, Vigor2200E, Vigor2200X and Vigor2200W Release Notes: 1. [Router Tools and Virtual TA Client] After v1.07 firmware, you should use new Router Tools 2.01 version. 2. [Virtual TA] Fixed Virtual TA can't work on v1.07. 3. [PPP-over-V.110] Add PPPoV110 indication on the "Online Status" page. 4. [Always-On for PPPoE/PPTP] Add an "Always-On" setting for PPPoE/PPTP dial-up connection. 5. [Disable PING from the Internet] Add a checkbox under Management Setup to enable/disable PING packets from the Internet. 6. [Call Scheduler] Change the default settings of schedules to be 2000/01/01. 7. [RIP control for LAN] Add a RIP control for LAN interface under "LAN TCP/IP and DHCP Setup" page. If your local networks has many subnets want to share the router to the Internet. Please set "RIP Protocol Control" to be "1st subnet". 8. [Static or Dynamic IP for WAN port] Improve Dynamic IP to be compatible with some cable providers. 9. [PPTP for WAN port] If users select PPTP for WAN port, the PPTP server will be 10.0.0.138 and the IP address of WAN port will be 10.0.0.150 with netmask 255.0.0.0. 10. [LAN-to-WAN Throughput] Improve the throughput between LAN and WAN interface. 11. [Wireless LAN] Improve web configuration for the part of wireless LAN settings. 12. [DNS Proxy] Improve DNS Proxy for working with RedHat 7.1 Linux. *********************************************************************************************** *********************************************************************************************** Release Notes for Vigor2200 Series Firmware Version : v1.07 Build Date/Time : Tue Jun 26 11:54:2.26 2001 DrayTek Corp. Date: 2001/06/22 *********************************************************************************************** Files Description: <<< Firmware >>> \Firmware\v2k20107.all --- Lastest released firmware \Firmware\v2k20107.rst --- lastest released firmware with default settings \Firmware\v2k2_107.exe --- Auto-Upgrade Utility, this utility will work after v1.07 firmware. <<< Tools >>> \Tools\RtTools_2.01.exe --- This Router Tools should work with v1.07 firmware. \Tools\VSetup2k.exe --- Virtual TA Client 1.06 for Win2000 \Tools\VSetup95.exe --- Virtual TA Client 1.06 for Win95 \Tools\VSetup98.exe --- Virtual TA Client 1.06 for Win98 Hint for upgrading Firmware: 1. Using Web Configurator to enable TFTP server. Please click "System Management" > "Firmware Upgrade" to press OK button. 2. Launch the Firmware Upgrade Utility to select the firmware to send. The utility in the Router Tools. Release Notes: 1. [Router Tools and Virtual TA Client] The Router Tools and Virtual TA Client have been updated, you have to uninstall them from your computer first, then install new ones. You will get new release in the Tools folder. a. The system administrator password has been encrypted between router and Smart Start Wizard. b. Fixed a dual-CPUs problem for Virtual TA Clients. 2. [ISDN interface control] Add a ISDN interface control option on Web Configurator to enable or disable ISDN port. You will find the option in "ISDN Setup" of Basic Setup group. 3. [PPP-over-V.110] Support PPP over V.110 protocol for GSM mobile users remote dial-in access. 4. [MTU setting for WAN] Add a Telnet command "wan mtu ..." to set the MTU (Maximum Transmission Unit) for the Ethernet WAN interface. You can use this command to configure the MTU size for ISDN, PPPoE, PPTP and Static IP modes. 5. [SNMP Agent] Support SNMP (Simple Network Management Protocol) for improving the capabilities of network management. You will find SNMP Setup in the "Management Setup" of System Management group. 6. [DDNS function] Support DDNS (Dynamic Domain Name System) function. If you are a registered user of www.dyndns.org (the provider of DDNS), you can give one or many domain names for your active WAN interface using the function. 7. [Time Client and Call Scheduler] Support NTP (Network Time Procotol) client and Call Scheduler function. The Call Scheduler funtion provides you to schedule router's WAN connection or LAN-to-LAN connection by your local time. The NTP client setup could be found in "Time Setup" of System Management group. The profiles of Call Scheduler could be found in "Call Scheduler Setup" of Advanced Setup group. Also you will see these profiles could be assigned for Interface Access (ISDN, PPPoE and PPTP) and LAN-to-LAN access. 8. [Online Status] Add a System Uptime on the "Online Status" page of web configurator. 9. [DHCP Server] If put zero in the IP Pool Counts, the dynamic IP pool will be disabled. Now you can use Telnet command set "srv dhcp fixip" to add or delete static IP pool. This static IP pool supports 10 IP addresses. > srv dhcp fixip ? % Valid subcommands are: add clr del Under the "srv dhcp fixip" command string, it support three subcommands: "add", "clr" and "del". > srv dhcp fixip add ? % srv dhcp fixip add The "add" subcommand can add a specific IP address based on host's Ethernet MAC address. The Host ID is optional. For example, if you want to specify a IP address 192.168.1.123 to a specific computer with MAC address 00-50-7F-12-34-56, you can try the following command to add. > srv dhcp fixip add 192.168.1.123 00-50-7F-12-34-56 vigor > srv dhcp fixip del ? % srv dhcp fixip del The "del" subcommand can delete a pre-assigned IP address from the static IP pool. For example, > srv dhcp fixip del 192.168.1.123 the host 192.168.1.123 will be removed from the static IP pool. > srv dhcp fixip clr The "clr" subcommand can clear the static IP pool to default values. 10. [Verify default Settings] A new Telnet command "sys cfg status" can check if the router is working with default settings. If yes, you will see the following message. > sys cfg status Profile version: 0x2 Status: 0 (0x293ab002) where Status: 0 (0x293ab002) means the router is default settings. 11. [Auto Firmware Upgrade] After v1.07 version, Vigor2200 will support Auto Firmware Upgrade Utility to update vigor's firmware automatically. Now, the utility just can run on the Windows machines. *********************************************************************************************** *********************************************************************************************** Release Notes for Vigor2200 Series Firmware Version : v1.06c Build Date/Time : Wed Mar 28 16:36:42.5 2001 DrayTek Corp. Date: 2001/03/28 *********************************************************************************************** Files Description: <<< Firmware >>> \Firmware\v2k20106.all --- Lastest released firmware \Firmware\v2k20106.rst --- lastest released firmware with default settings Hint for upgrading Firmware: 1. Using Web Configurator to enable TFTP server. Please click "System Management" > "Firmware Upgrade" to press OK button. 2. Launch the Firmware Upgrade Utility to select the firmware to send. Release Notes: 1. Support 3V and 5V Flash EPROM. 2. Fix a WAN port buffer leakage problem. *********************************************************************************************** *********************************************************************************************** Release Note for Vigor2200 Series Firmware Version : v1.06b Build Date/Time : Thu Feb 15 15:17:51.43 2001 DrayTek Corp. Date: 2001/02/16 *********************************************************************************************** Files Description: <<< Firmware >>> \Firmware\v2k20106.all --- Lastest released firmware \Firmware\v2k20106.rst --- lastest released firmware with default settings Hint for upgrading Firmware: 1. Using Web Configurator to enable TFTP server. Please click "System Management" > "Firmware Upgrade" to press OK button. 2. Launch the Firmware Upgrade Utility to select the firmware to send. Release Notes: 1. Modify the Ethernet driver to improve router's QoS for internal users to surf the Internet. 2. Fixed a Typing error in ipnatdmz.sht of Web Configurator. "Corbg." ---> "Corp." 3. ISDN dial-in improvement. Sometimes the dial-in will be failed when the remote ISDN TA or router to use ML-PPP to dial into Vigor2200 or Vigor2200X. 4. Fix a problem that Open Ports can not input 65535 port number. 5. Fix a Clear button problem under "Advanced Setup" > "IP Filter/Firewall Setup" > "Edit Filter Set". *********************************************************************************************** *********************************************************************************************** Release Note for Vigor2200 Series Firmware Version : v1.06a Build Date/Time : Thu Jan 11 16:42:46.42 2001 DrayTek Corp. Date: 2001/01/12 *********************************************************************************************** Files Description: <<< Firmware >>> \Firmware\v2k20106.all --- Lastest released firmware \Firmware\v2k20106.rst --- lastest released firmware with default settings <<< Router Tools & Virtual TA Client >>> \Tools\Windows\RtSetup.exe --- Router Tools for all Windwos Platforms \Tools\Windows\VSetup2k.exe --- VTA client for Windows 2000 \Tools\Windows\VSetup95.exe --- VTA client for Windows 95 \Tools\Windows\VSetup98.exe --- VTA client for Windows 98 \Tools\Mac OS\RtTool.hqx --- Router Tools for Mac OS <<< User Manual >>> \Manual\v2k2man.pdf --- Vigor2200's User Manual Hint for upgrading Firmware: 1. Using Web Configurator to enable TFTP server. Please click "System Management" > "Firmware Upgrade" to press OK button. 2. Launch the Firmware Upgrade Utility to select the firmware to send. Release Notes: 1. Improve DMZ host function for Mac OS 9. 2. Add Open Ports function which allow users to open a port range for specific network applications. 3. Improve NAT engine for FTP protocol pass-thru. 4. Fix a LAN-to-LAN and ISP access via ISDN simultaneouly problem which when a LAN-to-LAN connection is up the ISP access will be failed. 5. Improve Web Configurator for more user-friendly with JavaScripts. 6. Improve Web Configurator for IE 5.5 and Netscape 6.0 browser. 7. IPSec ESP tunnel mode pass-thru support. 8. All Vigor2200 series routers (Vigor2200, Vigor2200E and Vigor2200X) use the same firmware. *********************************************************************************************** *********************************************************************************************** Release Note for Vigor2200 Series Firmware Version : v1.06 Build Date/Time : Fri Nov 17 12:16:59.14 2000 DrayTek Corp. Date: 2000/11/17 *********************************************************************************************** Files Description: <<< Firmware >>> \Firmware\v2k20106.all --- Lastest released firmware <<< Router Tools & Virtual TA Client >>> \Tools\Windows\RtSetup.exe --- Router Tools for all Windwos Platforms \Tools\Windows\VSetup2k.exe --- VTA client for Windows 2000 \Tools\Windows\VSetup95.exe --- VTA client for Windows 95 \Tools\Windows\VSetup98.exe --- VTA client for Windows 98 \Tools\Mac OS\RtTool.hqx --- Router Tools for Mac OS Hint for upgrading Firmware: 1. Uncompress the file v2k20106.zip to be upgradeable firmware v2k20106.all. 2. Using Web Configurator to enable TFTP server. Please click "System Management" > "Firmware Upgrade" to press OK button. 3. Launch the Firmware Upgrade Utility to select the firmware to send. Release Notes: 1. Most of features are ready as Vigor2000's v1.06 version. Please refer to the release note of Vigor2000's v1.06. 2. DMZ Host support. The DMZ (De-militized host) can expose a internal host to be public. For some special application, such as Microsoft Game --- Age of Empires. You should set the game host to be the DMZ host to play the game with other Internet users. 3. For specific applications configurations are below. Netmeeting: Set the Netmeeting host to be the DMZ host. mIRC: Set the mIRC host to be the DMZ host. ICQ: Set the ICQ host to be the DMZ host. PPTP Pass-Thru: No other setting needed. Battlenet: 1. Warcraft: Create a redirected port UDP:6112 for the game host. 2. Starcraft: Create a redirected port UDP:6112 for the game host. 3. Diablo, Dialbo II: Create a redirected port UDP:4000 for the game host. Quake: Create a redirected port UDP:27960 for the game host. Tribes: Set the Tribes host to be the DMZ host. Napter: Create a redirected port TCP:6699 for the MP3 sharing host. GunTella: Create a redirected port TCP:6346 for the MP3 sharing host. Note that if you want to share internal media files to outside, you should click "Config" on the application menu to update the Local IP to be the WAN IP of the Internet connection. 4. Telnet commands for DHCP client troubeshooting. > ip dhcpc status --- View the DHCP client status on WAN interface. > ip dhcpc release --- Release all settings of WAN interface. > ip dhcpc renew --- Renew all settings of WAN interface. > log -i -t --- Display all DHCP messages between Vigor2200 and Cable head end system. *********************************************************************************************** [End of File]