********************************************************************************
    Release Notes for Vigor2200E-plus

    Firmware Version    : v2.5

    Build Date/Time     : Tue Nov 18 17:2:41.82 2003

    Date: Nov 18 2003

********************************************************************************
Files Description:

    << Firmware >>
 
        \Firmware\v2k2e250.all              --- Latest Released firmware
        \Firmware\v2k2e250.rst              --- Latest Released firmware with 
                                                default settings                                          

Release Notes:

 This first version is based on Vigor2300 version 2.5 and add following functions.

    [New Functions]:
        1. Add Qick Start Wizard in Web Configrator.
        2. Add UPNP function.
        3. Add VLAN function.


 Hints for upgrading router's Firmware:
 Note: Normally the router has been installed the same version of the firmware
       in the CD before the shipping.     
     
    Using Firmware Upgrade Utility:

        Firmware Upgrade Utility is a TFTP client software. Before upgrading your router,
        its TFTP srever should be enabled in advance and then the utility could send new 
        firmware file to the router.

        1. Using Web Configurator to enable TFTP server. Please click "System Management"
           > "Firmware Upgrade" to press OK button. Note that now the router is running in
           boot loader mode and waiting for upgrade. Now you will see the left-most two LEDs
           are blinking togather. 
        2. Launch the Firmware Upgrade Utility, and select the firmware v2k2exxx.all
           to send. After sending, please wait for 30 seconds to finish the upgrade
           procedure. 

    Note: You should restart your web browser after firmware upgrade to get the new
            page of web configurator. 

 Supported Models:

        Vigor2200E-plus

/* END OF FILE */