Guide to Revise Firmware of VP-100 & VP-400


NOTICE!!!
========================================================================================================
For FW later than 1.012, you can use both method A and B. For prior versions, only method B can be applied. Or your VPON will fail to boot.
========================================================================================================


A. Upgrade via revise.htm
=====================================================================

1. Download SYSTEM.BIN from our ftp site.

2. Revise system file by "revise.htm"

3. After VP-100/400 restart and ready, done. 

4. All the components required has already been upgraded, including kernel, system libraries, utilities, webpages, resources, and firmware. Though the original settings will be kept, it is still recommended to restore the default settings before start to use the new firmware.




B. Use GHOST
=====================================================================

1. Download GHOST image file, ex: en102.gho from our ftp site.

2. Use GHOST to write the image to the DOM.

3. Use the DOM to boot the system.